ECA | Electronic Components Association

 

Projects


Engineering Active Projects Standards
The following are active standards projects. Comments may be submitted to engineering@ecaus.org.

Download: PINS Form Template --> PDF -->Word
Project Number: Title Initiation Date Committee Reserved Final Publication Number: Status

Check = Complete
PN-5205 Cavity-to-Cavity Leakage Bonding Integrity Test Procedure for Electrical Connectors 01/25/2010 CE-2.0 EIA-364-78B  
PN-5204 Corrosivity of Contacts Test Procedure for Electrical Connector and Socket 12/08/2009 CE-2.0 EIA-364-113  
PN-5203 Fretting Corrosion Test Sequence for Electrical Connectors and Sockets 12/08/2009 CE-2.0 EIA-364-105  
PN-5202 Specification for Micro Serial Attached SCSI (SAS) Connector 11/29/2009 CE-2.0 EIA-967  
PN-5201 Specification for Unshielded Dual Port Serial Attachment Connector 11/20/2009 CE-2.0 EIA-966  
PN-5200 Probe Damage Test Procedure for Electrical Connectors 10/22/2009 CE-2.0 EIA-364-25D  
PN-5199 Shell - to - Shell Conductivity Test Procedure for Electrical Connectors 10/17/2009 CE-2.0 EIA-364-83A  
PN-5198 Integrated Passive Device (IPD) Definitions 10/14/2009 P-10 CB-16  
PN-5197 Integrated Passive Device (IPD) Chipscale Package Design Guidelines 10/14/2009 P-10 EIA-800  
PN-5196 Integrated Passive Devices Product Registrations 10/14/2009 P-10 EIA-850  
PN-5192 THICK FILM RESISTOR SPECIFICATION 06/16/2009 P-1 EIA-575 B  
PN-5191 DETAIL SPECIFICATION FOR MINI MULTILANE SHIELDED INTEGRATED CONNECTOR 06/11/2009 CE-2.0 EIA-965  
PN-5190 DETAIL SPECIFICATION FOR QSFP+ COPPER AND OPTICAL MODULES 06/11/2009 CE-2.0 EIA-964  
PN-5189 FIREWALL FLAME TEST PROCEDURE FOR ELECTRICAL CONNECTORS 06/04/2009 CE-2.0 EIA-364-45B Check
PN-5188 LOW FREQUENCY SHIELDING EFFECTIVENESS TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS 06/03/2009 CE-2.0 EIA-364-80A Check
PN-5187 RESIDUAL MAGNETISM TEST PROCEDURE FOR ELECTRICAL CONNECTORS 06/02/2009 CE-2.0 EIA-364-88A Check
PN-5186 TEST PROCEDURES FOR ELECTRICAL CONNECTORS 06/02/2009 CE-2.0 EIA-364-51 Check
PN-5183 ENVIRONMENTAL TEST METHODOLOGY FOR ASSESSING THE PERFORMANCE OF ELECTRICAL CONNECTORS AND SOCKETS USED IN CONTROLLED ENVIRONMENT APPLICATIONS 11/09/2008 CE-2.0 EIA-364-1000.01B Check
PN-5182 FIXED FILM DIELECTRIC CAPACITORS, STACKED METALLIZED CHIP CAPACITORS 11/05/2008 P-2.2 TBD  
PN-5181 NANOSECOND EVENT DETECTION TEST PROCEDURE FOR ELECTRICAL CONNECTORS, CONTACTS AND SOCKETS 09/26/2008 CE-2.0 EIA-364-87A Check
PN-5180 CABLE FLEXING TEST PROCEDURE FOR ELECTRICAL CONNECTORS 09/26/2008 CE-2.0 EIA-364-41E  
PN-5179 EFFECTIVE RESISTANCE OF PARALLEL CIRCUITS TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS 07/30/2008 CE-2.0 EIA-364-112  
PN-5178 LEAD TAPING OF COMPONENTS IN THE RADIAL CONFIGURATION FOR AUTOMATIC HANDLING 05/15/2008 ACH EIA/ECA-468-C Check
PN-5177 ALTITUDE IMMERSION TEST PROCEDURE FOR ELECTRICAL CONNECTORS 05/01/2008 CE-2.0 EIA-364-03C Check
PN-5176 TEST PROCEDURES FOR ELECTRICAL CONNECTORS AND SOCKETS 04/28/2008 CE-2.0 EIA-364-04A Check
PN-5175 LIGHTNING STRIKE TEST PROCEDURE FOR ELECTRICAL CONNECTORS 04/14/2008 CE-2.0 EIA-364-75 Check
PN-5171 ELECTRICAL CONNECTOR / SOCKET TEST PROCEDURES INCLUDING ENVIRONMENTAL CLASSIFICATIONS 06/21/2007 CE-2.0 EIA-364E Check
PN-5170 CABLE FLEXING TEST PROCEDURE FOR ELECTRICAL CONNECTORS 06/18/2007 CE-2.0 EIA-364-41D     Check
PN-5169 CABLE PULL-OUT TEST PROCEDURE FOR ELECTRICAL CONNECTORS 06/18/2007 CE-2.0 EIA-364-38C Check
PN-5168 THERMAL SHOCK (Temperature Cycling) TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS 06/18/2007 CE-2.0 EIA-364-32E Check
PN-5167 TEST PROCEDURES FOR ELECTRICAL CONNECTORS AND SOCKETS 06/07/2007 CE-2.0 EIA-364-19 Check
PN-5166 FLUID IMMERSION TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS 05/14/2007 CE-2.0 EIA-364-10E Check
PN-5165 CHINA RoHS ENVIRONMENTAL FRIENDLY USE PERIOD (EFUP) MARKING REQUIREMENTS 05/23/2007 S-1 CB-24 Check
PN-5164 TEST PROCEDURE FOR DETERMINING THE TOTAL IONIC CONTAMINATION OF AN ELECTRICAL CONNECTOR OR SOCKET ASSEMBLY OR COMPONENT 04/06/2007 CE-2.0 EIA-364-111 Check
PN-5163 ALTITUDE - LOW TEMPERATURE TEST PROCEDURE FOR ELECTRICAL CONNECTORS 03/23/2007 CE-2.0 EIA-364-105A Check
PN-5162 CONTACT AXIAL CONCENTRICITY TEST PROCEDURE FOR ELECTRICAL CONNECTORS 01/19/2007 CE-2.0 EIA-364-07C Check
PN-5161 INSULATION RESISTANCE TEST PROCEDURE FOR ELECTRICAL CONNECTORS, SOCKETS, AND COAXIAL CONTACTS 01/19/2007 CE-2.0 EIA-364-21D Check
PN-5160 WITHSTANDING VOLTAGE TEST PROCEDURE FOR ELECTRICAL CONNECTORS, SOCKETS, AND COAXIAL CONTACTS 01/19/2007 CE-2.0 EIA-364-20D Check
PN-5159 MATERIAL COMPOSITION DECLARATION FOR ELECTRONIC PRODUCTS 01/05/2007 EIA/EIC JIG JIG-101A Check
PN-5158 RESISTANCE TO SOLDERING HEAT TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS 11/30/2006 CE-2.0 EIA-364-56D Check
PN-5157 MATING AND UNMATING FORCE TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS 11/30/2006 CE-2.0 EIA-364-13D Check
PN-5156 TEMPERATURE LIFE WITH OR WITHOUT ELECTRICAL LOAD TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS 11/03/2006 CE-2.0 EIA-364-17C Check
PN-5155 AXIAL-LEADED, GLASS ENCAPSULATED CAPACITORS 10/25/2006 P-2.1 EIA 198 Part III Section 7  
PN-5154 AXIAL-LEADED CAPACITORS, CONFORMALLY COATED AND MOLDED TYPES 10/25/2006 P-2.1 EIA 198 Part III Section 6  
PN-5153 RADIAL-LEADED CAPACITORS, COMFORMALLY COATED AND MOLDED TYPES 10/25/2006 P-2.1 EIA 198 Part III Section 4 Check
PN-5152 RADIAL-LEADED, MOLDED CAPACITORS 10/25/2006 P-2.1 EIA-198 Part III Section 5  
PN-5151 HIGH VOLTAGE MULTILAYER CAPACITORS 10/25/2006 P-2.1 EIA 198 Part III Section 9  
PN-5150 HUMIDITY TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS 09/09/2006 CE-2.0 EIA-364-31C Check
PN-5149 ASSEMBLY PROCESSING, EVALUATION AND CLASSIFICATION OF Non-IC ELECTRONIC COMPONENTS 09/26/2006 S-1 TBD Check
PN-5143 ENVIRONMENTAL TEST METHODOLOGY FOR ASSESSING THE PERFORMANCE OF ELECTRICAL CONNECTORS AND SOCKETS USED IN CONTROLLED ENVIRONMENT APPLICATIONS 06/20/2006 CE-2.0 EIA-364-1000 Check
PN-5142 TEST PROCEDURES FOR ELECTRICAL CONNECTORS AND SOCKETS 06/09/2006 CE-2.0 TBD Check
PN-5141 SOLDERABLILTY TESTS FOR COMPONENT LEADS, TERMINATION, LUGS, TERMINALS AND WIRES 05/19/2006 STC J-STD-002C Check
PN-5138 SOLID TANTALUM CAPACITOR IN MICROMINI CASES 05/10/2006 P-2.5 941-A Check
PN-5137 SOLID TANTALUM CAPACITOR MOLDED CASE WITH FACEDOWN TERMINATIONS 05/10/2006 P-2.5 TBD  
PN-5136 MATING AND UNMATING FORCE TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS 01/26/2006 CE-2.0 EIA-364-13C Check
PN-5135 CAPACITOR STANDARD FOR IC ENGINE CRANKING 02/07/2006 KFI TBD Check
PN-5134 THERMAL SHOCK (Temperature Cycling) TEST PROCDURE FOR ELECTRICAL CONNECTORS AND SOCKETS 01/23/2006 CE-2.0 EIA-364-32D Check
PN-5133

ENVIRONMENTAL ACCEPTANCE REQUIREMENTS FOR WHISKER SUSCEPTIBILITY OF Pb-FREE ALLOY SURFACE FINISHES

 01/19/2006 S-1 EIA/ECA CB23 Check
PN-5130 MECHANICALLY-INTERLOCKED COMPONENT PACKAGING FOR AUTOMATIC HANDLING 01/18/2006 ACH EIA-704-A Check
PN-5129 BARE DIE AND CHIP SCALE PACKAGES TAPED IN 8mm & 12mm CARRIER TAPE FOR AUTOMATIC HANDLING 01/18/2006 ACH EIA-763-A  
PN-5128 8mm PUNCHED & EMBOSSED CARRIER TAPING OF SURFACE MOUNT COMPONENTS FOR AUTOMATIC HANDILING OF DEVICES GENERALLY SMALLER THAN 20.mm x 1.2 mm 01/18/2006 ACH EIA-726-A  
PN-5127

WIRE BENDING TEST PROCEDURE FOR INSULATION DISPLACEMENT CONTACTS (IDC) FOR ELECTRICAL CONNECTORS

 12/13/2005 CE-2.0 EIA-364-92 Check
PN-5126 POLARIZING/CODING KEY OVERSTRESS TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS 12/13/2005 CE-2.0 EIA-364-86 Check
PN-5125 VIBRATION TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS 11/10/2005 CE-2.0 EIA-364-28E Check
PN-5124 RESISTANCE TO SOLDERING HEAT TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS 11/29/2005 CE-2.0 EIA-364-56C Check
PN-5123
CANCELLED		 Ball Grid Array (BGA) and Land Grid Array (LGA) Test Sequence for Electrical Connectors and Sockets 10/10/2005 CE-2.0 EIA-364-1003 Check
PN-5122 INTEGRATED PASSIVE DEVICE PRODUCT REGISTRATIONS EIA-850 10/25/2005 P-10 EIA-850-A  
PN-5121 INTEGRATED PASSIVE DEVICE (IPD) CHIPSCALE PACKAGE DESIGN GUIDELINES EIA-800 10/25/2005 P-10 EIA-800-A  
PN-5120

IPD APPLICATION GUIDELINE

 10/13/2005 P-10 EIA/ECA 957-A Check
PN-5119 ARCHIVE THE FOLLOWING STANDARDS: EIA-172-B, EIA-460, EIA-196-A, EIA-396, EIA-451, EIA-452 9/21/2005 P-1 N/A Check
PN-5118 COMMENTS ON TEST METHODS AND CRITERIA FOR TIN WHISKERS IN SURFACE MOUNT PASSIVE DEVICES 9/21/2005 S-1 CB-22 Check
PN-5117 CORRECTION TO EIA 481 9/21/2005 S-1 CB-20 Check
PN-5116 ECA GUIDELINE: COUNTERFEIT PASSIVE COMPONENTS 9/21/2005 S-1 CB-21 Check
PN-5115 HAVE YOU SEEN TIN WHISKERS? THE FACTS ABOUT TIN WHISKERS 9/21/2005 S-1 CB-19A Check
PN-5114 ELECTRICAL SOCKET SPECIFICATIONS 7/7/2005 CE-2.0 EIA-540C000, 540CA00, 540CAAA, 540CAAB Check
PN-5113 LIGHTNING STRIKE TEST FOR ELECTRICAL CONNECTORS 7/24/2005 CE-2.0 EIA-364-75 Check
PN-5112 ELECTRICAL SOCKET SPECIFICATIONS 7/13/2005 CE-2.0   Check
PN-5111 LOW TEMPERATURE TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS 7/01/2005 CE-2.0 EIA-364-59A Check
PN-5110 CONTACT STRENGTH TEST PROCEDURE FOR ELECTRICAL CONNECTORS 7/01/2005 CE-2.0 EIA-364-15A Check
PN-5109 VISUAL AND DIMENSIONAL INSPECTION TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS 7/01/2005 CE-2.0 EIA-364-18B Check
PN-5106 CONTACT RESISTANCE TEST PROCEDURE FOR ELECTRICAL CONNECTORS 6/11/2005 CE-2.0 EIA-364-06C Check
PN-5105 LOW LEVEL CONTACT RESISTANCE TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS 6/11/2005 CE-2.0 EIA-364-23C Check
PN-5104 SURFACE MOUNT COMMAND MODE CHOKE 6/2/2005 P-3 EIA-958  
PN-5103 FLUID IMMERSION TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS 5/31/2005 CE-2.0 EIA-36410D Check
PN-5100 VISUAL AND MECHANICAL INSPECTION FOR MOLDED SOLID TANTALUM CHIP CAPACITORS 5/18/2005 P-2.5 EIA-757-A Check
PN-5099 SMD MULTILAYER CERAMIC CHIP CAPACITORS N/A P-2.1 EIA-198-E III/3  
PN-5098 SOLID TANTALUM CAPACITOR APPLICATION GUIDELINE 5/18/2005 P-2.5 EIA-809A Check
PN-5097 SURFACE MOUNT TANTALUM CAPACITOR QUALIFICATION SPECIFICATION 5/18/2005 P-2.5 EIA-717 Check
PN-5095 ANSI/EIA 521: APPLICATION GUIDE FOR MULTILAYER CERAMIC CAPACITORS - ELECTRICAL N/A P-2.1 ANSI/EIA - 521 Check
PN-5094 VISUAL AND MECHANICAL INSPECTION MULTILAYER CERAMIC CHIP CAPACITORS 5/16/2005 P-2.1 EIA-595 A Check
PN-5093 NEW STANDARD THIN FILM ON SILICON RESISTOR NETWORK SPECIFICATION 5/12/2005 P-1 TBA Check
PN-5092 REVISION ON EIA/IS-703 5/12/2005 P-1 EIA-703-A Check
PN-5091 REVISION ON EIA-887 5/12/2005 P-1 TBA Check
PN-5090 REVISION ON EIA-886 5/12/2005 P-1 TBA Check
PN-5089 CURRENT CYCLING TEST FOR ELECTRICAL CONNECTORS 4/20/2005 CE-20 EIA/ECA-364-55A Check
PN-5088 ASSEMBLY COMPONENT TRAY-ACT 8/13/2004 ACH EIA-960 Check
PN-5087 ELECTRICAL AND ELECTRONIC COMPONENT HAZARDOUS SUBSTANCE FREE STANDARD AND REQUIREMENTS 3/7/2005 ECCB EIA/ECCB-954 Check
PN-5086 REVISION OF EIA-364-89A 3/3/2005 CE-2.0 TBA Check
PN-5085 REVISION OF EIA-364-46B 3/3/2005 CE-2.0 EIA-364-46C Check
PN-5084 REVISION OF EIA-364-36B 3/3/2005 CE-2.0 EIA-364-36C Check
PN-5083 REAFFIRMATION OF 17 364 TP's 2/20/2005 CE-2.0 TBA Check
PN-5082 TRAY STANDARD 10/13/2004 ACH TBA Check
PN-5081 NON-CONVENTIONAL SMALL PITCH & WIDTH 10/13/2004 ACH TBA Check
PN-5080 WAVE AND CAMBER 10/13/2004 ACH TBA Check
PN-5079 NIOBIUM CAPS 10/13/2004 P-2.5 TBA Check
PN-5078 UPGRADE IS-717 10/13/2004 P-2.5 EIA-717  
PN-5077 REVISION OF EIA-809 10/13/2004 P-2.5 EIA-809-A  
PN-5076 COMBINE EIA-535BAAC & EIA-535BAAE 10/13/2004 P-2.5 TBA Check
PN-5075 NIOBIUN CAPS 10/13/2004 P-14 TBA Check
PN-5074
 USER'S APPLICATION GUIDE TO FUSES 10/28/2004
 P-14
 TBA
 Check
PN-5073
 LOW VOLTAGE SUPPLEMENTAL FUSE QUALIFICATION SPECIFICATION
 10/28/2004
 P-14
 TBA
 Check
PN-5072
 SURGE WITHSTAND TELECOMMUNICATIONS FUSE QUALIFICATION SPECIFICATION
 10/28/2004
 P-14
 TBA
 Check
PN-5071 METALLIC COATING THICKNESS MEASUREMENT OF CONTACTS TEST PROCEDURE FOR ELECTRICAL CONNECTORS 8/27/2004 ECA CE-2.0 EIA-364-48A Check
PN-5070 ENGINEERING SPECIFICATION FOR CACUUM GRADE MONEL ALLOY 404 (UNS N40400) FOR VACUUM ELECTRON DEVICES 8/17/2004 ECA MVED EIA/ECA-951  
PN-5069 ENGINEERING SPECIFICATION FOR VACUUM GRADE 70 COPPER 3 NICKEL ALLOY OF VACUUM ELECTRON DEVICES 8/17/2004 ECA MVED EIA/ECA-950  
PN-5068 ENGINEERING SPECIFICATION FOR METALLIZED BERYLLIUM OXIDE CERAMICS 8/17/2004 ECA MVED EIA/ECA-949  
PN-5067 STANDARD FOR PLANS TO DETERMINE LEAD CONTENT OF ELECTRONIC COMPONENTS AND RELATED EQUIPMENT 8/13/2004
Published SEP 2004
 ECCB TPC-1 EIA/ECCB-952 Check
PN-5065 RESISTANCE TO SOLVENTS TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS 8/4/2004 ECA CE-2.0 EIA-364-11B Check
PN-5047 MATERIALS COMPOSITION DECLARATION GUIDE 1/23/2003 EIA MDG-1 TBA  
PN-4996 QUALIFICATION SPECIFICATION FOR DIE LEVEL NETWORKS WITH SOLDER BUMP INTERCONNECTS 1/02/2002 P-10 EIA-961 Check