|
Home
> Technology Center
> Engineering Committees
> P-1 Committee
Minutes
of P-1 Committee on Resistive Devices
October 8, 2001
Loews Philadelphia Hotel, Philadelphia, PA
|
Members
Present
|
| Joe
Biernacki |
SEI
Electronics |
| Ted
Coler |
Vishay
Intertechology |
| Barry
Friedman |
Lucent
Technologies |
| Caddy
Greenidge |
Bradford
Electronics |
| Len
Metzger |
Panasonic
Industrial Co. |
| Ed
Mikoski |
EIA/ECA |
| Stephen
Olster |
Mini
Systems, Inc. |
| Brian
Piscitelli |
KOA
Speer Electronics |
| Bob
Reinhard |
CTS
Resistor/Electrocomponents |
| Dave
Ritchey |
Phycomp,
Inc. |
| Marie
Slezak |
Kamaya,
Inc. |
| Mike
Torres |
BI
Technologies |
|
Members
Organizations Present
|
Present
at Previous Meeting?
|
| Bradford
Electronics |
Yes |
| CTS
Resistor Networks Bus Unit |
Yes |
| KOA
Speer Electronics |
Yes |
| Lucent
Technologies |
No |
| Mini-Systems
Inc. |
Yes |
| Mitsubishi-Kamaya,
Inc. |
Yes |
| Panasonic
Industrial Co. |
Yes |
| Vishay
Intertechnology |
Yes |
| Yageo-Phycomp |
Yes |
|
Members
Organizations Absent
|
Present
at Previous Meeting?
|
| AEM,
Inc. |
No |
| Boeing
Space & Defense Systems |
No |
| Foxconn
International, Inc. |
No |
| IBM
Corporation |
Yes |
| International
Resistive Co Inc |
No |
| Ohmite
Manufacturing Co., Inc. |
No |
| Rohm
Electronics |
No |
|
Other
Organizations Present
|
| |
BI
Technologies |
| |
SEI
Electronics |
| |
EIA/ECA |
1.0
Introductions
Self-introductions were made.
2.0 Committee Organization and Procedures
2.1 Membership and Attendance
Attendance was taken, and it was determined that a quorum was present.
All attendees verified the correctness of the information on the rosters.
2.2 Approval
of Agenda
The Committee unanimously accepted the Agenda as presented.
2.3 Approval
of October, 2000 Meeting Minutes
The minutes of the Monday, April 23, 2001 Hyatt Hotel San Antonio, Texas
meeting were approved.
2.4 Correspondence
An update on the group's white paper will be addressed under 'New Business'.
2.5 Review of the Committee's Scope
No changes in committee scope.
2.6 DSCC Report
Since there was no Defense Supply Center Columbus representative present
at today's meeting there was no DoD report.
3.0 Old Business
3.1 Update status of White Paper on ESD - Dave Ritchey
At the last meeting, Dave Ritchey reported on the results of testing
concerning the effects of electrostatic discharge on thick-film resistors.
This was compiled into a white paper that was presented at today's meeting.
Some minor editorials were suggested for clarification. Dave will make
the changes and send an electronic copy including the accompanying data
to Ed Mikoski at ECA. The committee agreed to have the paper posted
on the website. The conclusion was that there are no ESD problems for
thick-film resistors.
3.2 Review ESD
tests in EIA/IS-703 and compare to AEC-Q200 Rev B matrix. Also compare
IEC-801 - Brian Piscitelli
The committee conducted a review discussion on the ESD tests in EIA/IS
703 and compared them to the AEC test Q200 Rev B dated Mar 15, 2000.
Particularly the Figure 4 Passive Component HBM ESD test flow diagram.
Subsequent to the discussion, the committee decided to prepare a value-size
chart for presentation at the next meeting. Dave Ritchey took on responsibility
for the task.
3.3 Add 0201
implementation issues to the agenda for future considerations - Nick
Marshall
No one was sure what the specifics of the subject were, and since Nick
was not present at the meeting and no report was submitted to the chair,
this item will be deferred to the next meeting.
3.4 Review EIA-576-A,
EIA-575-A, and CB-15 for updates and revisions - Brian Piscitelli
The documents were created in 1990. Based on discussions from the P-4
meeting this week, the classification designations will be changing,
so it is time to review the documents and update them. 0402 and 0201
case sizes are being manufactured and they do not yet appear in the
document. Maureen Slezak and Stephen Olster volunteered to review the
documents and to convert them into Microsoft Word files. Brian volunteered
to e-mail them some of the drawings for the figures to be inserted into
the document.
The committee decided
to withdraw PN-3809 that was begun in 1996. This project was for a document
to be called CB-15 Resistor Sourcebook.
4.0 New Business
4.1 Decreased pitch dimensions on SMD tape and reel - Brian Piscitelli
KOA in Japan at an EIAJ meeting proposed the new ½ pitch 0402
and 0603 components on carrier tape. Ted Coler and Dave Ritchey both
volunteered to present this proposal to the Automated Component Handling
Committee for consideration.
4.2 Other
When the basic text of PDP-100 is revised by Caddy Greenidge in P-4
committee, then it is to be posted on the website. At that point in
time, all members of the committee P-1 are encouraged to review the
document and consider publishing outlines.
5.0 Next Meeting
The next meeting will be at the 4th ECA Engineering Summit week of 14
April 2002 in Albuquerque, NM at the Sheraton Old Town Hotel.
6.0 Adjournment
The committee adjourned at 17:17 PM.
This meeting was
conducted in accordance with the EIA legal guidelines and the manual
of organization and procedures.
Brian Piscitelli,
Chairperson
Signature on file
Edward F. Mikoski,
Jr., Acting Secretary
Signature on file
Return
to P-1 Main
|
