|
Home
> Technology Center >
Engineering
Committees > P-3 Committee
Minutes of P-3 Committee on Inductive Devices
April 17, 2002
Sheraton Old Town Inn, Albuquerque, NM
|
Members Present
|
| Brian Piscitelli |
KOA Speer Electronics |
| Robert Blodgett |
Taiyo Yuden (USA) Inc. |
| Ken Beymer |
DSCC |
| William Gisseler |
TDK Corporation of America |
| Terry Charles |
Panasonic |
| Phil Diglio |
EPCOS Inc. USA |
| Dennis Cross |
DSCC-VAT |
| Brent Elliott |
Cooper Electronic Technologies |
| Mike Greenwood |
Intel Corp |
| David Ritchey |
Phycomp |
| Mike Lauri |
IBM |
| Yan Ma |
AEM |
| Ed Mikoski |
EIA/ECA |
| Chris Reynolds |
AVX |
| Les Rice |
KOA Speer |
| Michael Griffith |
KOA Speer |
|
Member Organizations Present
|
Present at previous meeting?/ Present at
meeting prior to previous?
|
| AEM |
Yes/Yes |
| Cooper Electronic Technologies |
Yes/No |
| KOA Speer Electronics |
Yes/Yes |
| AVX Corporation |
Yes/No |
| Panasonic Industrial
Company |
Yes/Yes |
| Taiyo Yuden (USA) Inc. |
Yes/Yes |
| IBM Corporation |
No/Yes |
| Yageo (Phycomp USA, Inc.) |
Yes/Yes |
| TDK Corporation of America |
Yes/Yes |
| EPCOS Inc. |
Yes/Yes |
| Intel Corp |
No/No |
|
Member Organizations Absent
|
Present at previous meeting?/ Present at
meeting prior to previous?
|
| Agilent Technologies |
No/No |
| Lucent Technologies |
Yes/No |
| Vishay |
Yes/Yes |
| Steward |
No/Yes |
| FCI |
No/No |
| Coilcraft |
No/No |
| BI Technologies |
No/No |
|
Others Organizations Present
|
| DSCC |
|
| EIA/ECA |
|
1.0 Committee Organization and Procedures
1.1 Membership Attendance
Self-introductions were made. Attendance was taken, and it was determined
that a quorum was present.
1.2 Approval of Previous Meeting Minutes
The minutes of the 10 October 2001 meeting held at the Loews Philadelphia
Hotel, Philadelphia. PA were unanimously approved.
1.3 Approval of Agenda
The Committee unanimously accepted the Agenda as presented.
1.4 Correspondence
There was no correspondence except the returned ballots of PN4315 &
PN4233.
2.0 Old Business
2.1 Vote results for PN4233 Surface Mount Inductor Qualification Specification
Results were 5 approvals, 2 approvals with comments, 2 abstentions,
and two no responses.
2.2 Review of suggested addenda for specification
Numerous points were left outstanding and are to be addressed at a 4:00pm
meeting of P-3 on 04/17/02. First issue is to determine whether a quorum
is present prior to any discussions.
2.3 Vote results for PN4315 Surface Mount Ferrite Chip Bead Qualification
Specification
Results were 6 approvals, 2 approvals with comments, 1 abstention, and
two no responses.
2.4 Review of suggested addenda for specification
A review of suggested changes to PN4315 was discussed. Updates were
added to the specification. A motion was made, seconded and approved
to accept PN4315 with changes. File name is PN4315_041702.doc. This
approved document PN4315 is to proceed forward to ECA for publication.
(Updates are in red color. Sections include: 4.2,4.3, 4.5.1, 4.6, 4.8,
4.11, & 4.12.)
3.0 New Business and Opportunities
3.1 Additional test and characterization of chip bead impedances
Not discussed, Subject is carried over to Fall 2002 meeting.
3.2 Test procedures and recommended electrical parameters foe smd inductors
and ferrite beads
Not discussed, Subject carried over to Fall 2002 meeting.
3.3 Surface mount multiplayer (ceramic) inductors
Not discussed, Subject carried over to Fall 2002 meeting.
3.4 Other new business?
Not discussed in detail., Subject carried over to Fall 2002 meeting.
IBM as a voting member didn't receive the email ballots. Situation is
under review.
ECA is updating the database in order to provide a consistent list of
voting members to the chairman.
4.0 Next Meeting
The next meeting will be at the ECA Fall Engineering Summit Week of
7-10 October, 2002 at the Downtown Marriott in Charlotte, NC.
5.0 Adjournment
The meeting was adjourned at approximately 12 noon.
A motion was made, seconded and approved to adjourn. Meeting adjourned
at 12:19p. A follow-up meeting is scheduled for 4:00pm on 4/17/2002
to discuss open issues in P-3 for PN4233 SMD Inductor Specification.
If a quorum is present, items will be included within the minutes. Otherwise,
these issues will appear as items for further discussion at the upcoming
Fall 2002 Engineering Summit.
6.0 Addendum to the minutes:
P-3 group met during an extended session at 4:05p on 4/17/2002. It
was determined there was a quorum present. The list of the attending
members:
|
Members Present
|
| Terry Charles |
Panasonic |
| Brent Elliott |
Cooper Electronic Technologies |
| Bill Gisseler |
TDK Corporation |
| Michael Griffith |
KOA Speer |
| Mike Lauri |
IBM |
| Yan Ma |
AEM |
| Les Rice |
KOA Speer |
| David Ritchey |
Yageo (Phycomp USA, Inc.) |
6.1 Discussion item: PN4233, adjustment of temperature and specifications
update. Changes were implemented to the document. A motion was made
to update PN4233 to include these changes, it was seconded and carried.
Data to be available for the Fall 2002 meeting.
6.2 Activity of P-3 Projects:
6.2.1 PN2006, EIA IS/ 759 Standard for Chip Inductors, Rescind, a motion
was made, it was seconded and carried.
6.2.2 SP3334, Multilayer Chip Inductor Qualification, Rescind, a motion
was made, it was seconded and carried.
6.2.3 SP3337, Surface Mount Wound Inductor Specification, Rescind,
a motion was made, it was seconded and carried.
6.2.4 Other Active P-3 Projects to be discussed at Fall 2002 Session.
This meeting was conducted in accordance with the EIA legal guidelines
and the manual of organization and procedures.
Bill Gisseler, Chairperson
Signature on file
Edward F. Mikoski, Jr., Acting Secretary
Signature on file
Return
to P-3 Menu
|
