|
Home
> Technology Center >
Engineering
Committees > P-2.4 Committee
P-2.4 Aluminum
Electrolytic Capacitors Committee
Wed., 5 April 2000
Quality Hotel
Arlington, VA
1 Committee organization
and procedures
1.1 Membership
and attendance
Self-introductions were made, attendance taken, and it was determined
that a quorum was present.
1.2 Approval
of the Agenda
The Committee unanimously accepted the Agenda as presented.
1.3 Approval
of the Minutes
The Committee unanimously accepted the Minutes of the last meeting as
corrected, e.g., removal of Galli's name on the absent list. Mr. Galli
is already listed as voting member present list.
1.4 Correspondence
Correspondence relates to a new project and open up some tolerances
on EIA-463.
Remove Mr. Li from the voting and CTA list.
ACTION ITEM-
Remove Mr. Li (AEM,Inc.) from the voting and CTA list.
1.5 Review of
the Committee's scope
No review was needed.
1.6 Report of
task groups and DSCC efforts
A report was circulated and will be attached electronically with the
Minutes.
2 Old business
2.1 PN-4283,
EIA-797, Aluminum electrolytic capacitor application guideline
The letter ballot had 9 replies. Eight approved the ballot. One disapproved
with comments. The Committee discussed the major comment and agreed
to alter the offending part . The remainder comments were editorial.
As a result of the discussion, the Committee moved, seconded, and voted
unanimously to change in 2.2.8.1 the following part, and the core temperature
is assumed the case temperature to the core temperature rise over the
case temperature is often neglected and other minor editorial changes.
ACTION ITEM -
Mr. Aronson will make revision to document.
Mr. Mosier will write letter stating the committee's action to the person
submitting the negative comment and vote.
2.2 Five year
review of documents
No document was needed to review.
3 New business
3.1 Review of
preliminary SMT aluminum electrolytic capacitor qualification specification
A discussion ensued on the preliminary document. The question arose
whether to reference IEC documents in the standard.
3.2 Proposed
revision to EIA-463-A, Fixed aluminum capacitors for alternating current
motor starting
Mr. Mosier will circulate to the Committee requested changes to the
standard for future action at the October meeting.
3.3 Proposal
to hold consecutive meetings of the P-2.4 and P-2.2 in a common two
hour time slot.
The Committee opted to hold consecutive meetings of the P-2.4 and P-2.2
in a common two-hour time slot.
3.4 Proposal
to improve the sign-up process by (1) a single sheet with printed data
of attendees with check-off capability.
This proposal was made and Mr. Aronson will take it as an action item.
4 Selection of next meetings The next meeting will occur in the week
of 2-4 October 2000 at the Wyndom Hotel in San Diego, California.
5 Adjournment
The Committee moved, seconded, and unanimously agreed to adjourn at
5:00 PM.
6 Action items
Improve meeting sign-in process by preprinting all member information(voting
& non-voting) on a sheet with a placed to confirm attendance.
Remove Mr. Li (AEM) from voting and CTA lists.
This meeting was
conducted in accordance with the EIA legal guidelines and the manual
of organization and procedures.
EIA/ECA
P-PANEL REPORT P-2.4
MILITARY
ALUMINUM ELECTROLYTIC CAPACITOR SPECIFICATIONS
Document Actions
in Process
DSCC Drawing 89012; Polarized Aluminum Oxide; Dated
DSCC Drawing 89021; Polarized Alum. Oxide Low ESR; Dated
MIL-PRF-39018/2, /6, /7; Aluminum Oxide ESR and Non ESR;Dated
Document cancelations
NONE
Documents Inactivated
for new design
NONE
MIL-STD-1131
(Storage Shelf Life and Reforming Procedures …)
MIL-STD-1131 has been converted to a military handbook. Significant
changes were made the wording (change from mandatory type text to guideline
type text). Reference to AQLs and MIL-STD-105 were removed and accept
on zero sampling plan was added. The final draft was dated 11 July 1999
an has been posted to the web site http://www.dscc.dla.mil/Downloads/MilSpec/Docs/
POINTS OF CONTACT
FOR FSC 5910
DCSS-VAT Ken Bernier
Defense Supply Center, Columbus
3990 East Broad Street
Columbus, OH 43216-5000
Phone: (614) 692-0563
Fax: (614) 693-1644
EMAIL: kenneth_bernier@dscc.dla.mil
DCSS-VAT Pat Kyne
Defense Supply Center, Columbus
3990 East Broad Street |
Columbus, OH 43216-5000
Phone: (614) 692-0562
Fax: (614) 693-1644
EMAIL: patrick_kyne@dscc.dla.mil
DSCC-VAT Mike Radecki
Defense Supply Center, Columbus
3990 East Broad Street
Columbus, OH 43216-5000
Phone: (614) 692-0561
Fax: (614) 693-1644
EMAIL: michael_radecki@dscc.dla.mil
DSCC INTERNET ADDRESS: http://www.dscc.dla.mil
Return
to P-2.4 Menu
|
