|
Home
> Technology Center >
Engineering
Committees > P-10 Committee
P-10 IPD Committee
Wednesday, 5 April
2000
Quality Hotel
Arlington, VA
1 Committee organization
and procedures
1.1 Membership and attendance
Self-introductions
were made, attendance taken, and it was determined that a quorum was
present.
1.2 Approval
of the Agenda
The Committee
unanimously accepted the Agenda as presented.
1.3 Approval
of the Minutes
The Committee
unanimously accepted the Minutes of the last meeting as written.
1.4 Correspondence
No correspondence
was received.
1.5 Review of
the Committee's scope
No review
was needed.
1.6 Report of
task groups and DSCC efforts
2 Old business
2.1 RC test performance
specification paper ballot status
ACTION ITEM -
Mr. Krystek will resend a clean copy to Mr. Aronson
ACTION ITEM - Assure that the approved document is paper balloted as
soon as possible
2.2 IPD circuit
registration document review/ballot
A discussion
ensued on the standard. Corrections that were identified were:
1) Whenever a JEDEC-95 physical outline or EIA physical outline exists
it shall be used, else the physical outline shall be included in the
IPD Registration.
2) In 4, registration has to be approved by P10 or a P10 delegated working
group.
3) 7, Sample of registration: change one of the R1 to R2.
The document
was proposed and seconded and accepted unanimously.
2.3 IPD chip
scale package test/qualification requirements status
Chairman
Krystek informed the committee that chip scale test requirements have
been submitted by: Philips, Bourns, KOA and California Micro Devices.
The chairman is awaiting information from Intarsia before summarizing
the data for committee discussion.
3 New business
4 Selection of
next meetings
5 Adjournment
The Committee
moved, seconded, and unanimously agreed to adjourn at 4:50PM.
6 Action items
This meeting was
conducted in accordance with the EIA legal guidelines and the manual
of organization and procedures.
Return
to P-10 Main
|
